It is not advisable to run thinner material on the Model 10 Flanger. Please inquire about flanging thinner materials.
Maximum Thickness
1" / 25 mm
Can the Model 10 run thicker material?
No. Unless the material is aluminum or another soft material, do not exceed 1" / 25 mm.
Minimum Diameter
Flat Head
Dished Head
N/A
24" / 610 mm
Can the Model 10 flange smaller diameter heads?
It is possible to make smaller diameter heads with the addition of optional equipment and/or with machine modifications. Please inquire for more information.
Maximum Diameter
Flat Head
Dished Head
N/A
168" / 4270 mm
Can the Model 10 flange larger diameter heads?
Yes, but the machine would need to be equipped with a longer Carriage to flange larger heads.
Standard Knuckle Radius Sizes
Dished Head
Upper Roll for Dished Head Flanging
2" / 50 mm 4" / 100 mm 6" / 150 mm 8" / 200 mm 10" / 250 mm 12" / 300 mm 14" / 350 mm 16" / 400 mm
These are the standard sizes for the Model 10. However any size can be fitted for the Model 10 within the range of 1" 25 mm - 16" / 400 mm.
Minimum Knuckle Radius
Dished Head
1" / 25 mm
This knuckle radius is only suitable for thin material. Please inquire if you have need of a smaller knuckle radius.
Maximum Knuckle Radius
Dished Head
16" / 400 mm
This radius would not be suitable for very thin material. Please inquire if you have need of a larger knuckle radius.
